Contact
Salg og kundeservice info@efapaint.dk +45 75 12 86 00
EFAdeck™ Original 454 Clear
Series: 0454Durable and chemical resistant industrial floor paint.
EFAdeck™ Clear used for the coating of wood and concrete floors where you want a strong, dust-free surface with good chemical resistance. Can also be used as a mold lacquer for concrete moulds. This product is designed for professional use.
EFAdeck™ Clear is a clear coat with a light brown color. Treatment with EFAdeck™ Clear, should be done with the aim of strengthening the floor, more than aesthetic reasons . After treatment, the floor will look like wet concrete. The paint provides a high wear resistance, good water and chemical resistance. The wear resistance measured by Taber Abraser ( ASTM D 4060-84 ) : 38.7 mg / 1,000 rpm .
Paint withstands spills of gasoline, motor oil, diesel, waste oil, and brake fluid. . Battery acid should be wiped up immediately after spillage.
EFAdeck™ Clear is a one-component, moisture-curing clear lacquer based on polyurethane
| Package dimensions: | 20 l / 19,2 kg., 5 l / 4,8 kg. |
| Coverage: | 7 m²/L. |
| Dry time: | Dry to use 6-10 hours 20°C. |
| Application: | Brush, broom or roller. |
| Type: | Solventborne |
| Riskicons: |
|
| Riskwords: | Danger |
| Risk: |
- Flammable liquid and vapour.
- Causes skin irritation. - Causes serious eye irritation. - May cause an allergic skin reaction. - Suspected of causing cancer. - May cause respiratory irritation. - May cause drowsiness or dizziness. - May cause damage to organs through prolonged or repeated exposure. - Toxic to aquatic life with long lasting effects. - May cause allergy or asthma symptoms or breathing difficulties if inhaled. - Repeated exposure may cause skin dryness or cracking. |
Application:
Pretreatment:
The floor must be clean and dry - max. 10 % RH. If the concrete has been steel
trowelled to make the surface impenetrable, thorough grinding is recommended (pls.
see below).
Apply EFAdeck™ Clear 454, without thinning.
NB! By painting on self-compacting concrete / self levelling compound, the product likewise has to be applied without thinning.
Since EFAdeck™ Clear 454 not only coats the surface, but also penetrates and strengthens
the concrete, two coats are recommended. The second coat should be applied, no
later than 24 hours after the first.
Provide generous ventilation during application and drying. Insufficient ventilation may
lead to gloss differences in the finished product.
Grinding of concrete floors:
Prior to painting a concrete floor, it is necessary to check if the concrete will allow the
paint to penetrate and adhere. This may be done by placing drops of water on the
concrete surface and observe if the drops remain as pearls on the surface, or if the
concrete surface absorbs the water. If the water penetrates the concrete surface, the
floor will be ready to paint after cleaning and vacuuming. If the water remains as pearls
on the surface of the concrete, the concrete must be ground with a suitable floor
grinder or shot blasted. The grinding must be through enough to allow the water
droplets to penetrate into the concrete.
| Technical datasheets: |
Download (En-GB/EU)
Download (Da-DK) |
| Safety sheets: | Find det her |
